USB 4 Axis 6040 CNC Router Engraver Milling Drilling Machine 1500W with Controller

  

Package Include 1 Remote controller 1 Cable engraving machine parameters: X, Y, Z Working Area: 600(Y)390(X)120(Z)mm Outside dimension: 865680570mm(LWH) Table size: 770(Y)490(X)mm Lathe structure: 6061/6063 Aluminium alloy Max. This 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. And soft metal, like aluminum, copper and silver to engrave them into 3D/2D works etc.

It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. The mini router Frame is movable. The machine can connect with computer as other external device such as printer, scanner..

With the assist of the ROUTER 6040T, your design idea will be real-time display. 4 Axis Engraving Machine Manual Remote Controller. Industrial fit for engraving machine controller was designed system.

Waterproof design, very durable, anti-dirt, oil spray. Dimensions: 22 x 8 x 3cm. Please note: this item works with. The usb self-check light, you can type the " scroll" on the keyboard to activate it.

Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point.

X, Y, Z Working Area: 600(Y)390(X)120(Z)mm. Lathe structure: 6061/6063 Aluminium alloy. X axis---High intensity Chromeplate shaft. Y axis---High intensity Chromeplate shaft. Z axis---High intensity Chromeplate shaft. 1, Water cooled spindle motor can work longer time than air cooled motor. 2, Water cooled spindle motor has higher stability and better concentricity than air cooled motor. The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC110V). Please don't change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.

Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket. VOLTS, current, power: AC110V, 60Hz. Spindle motor: 1.5 KW Water Cooled. Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.

Lubrication way: lubricated by high grease. Spindle precision: radial beat acuities 0.03mm. Carving Instructions: G code / TAB files / nc file / NCC files. Communication interface: through USB connection with computer. Working Speed: 50-1500mm / min (different material with different speed settings).

Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. The NEW 1.5KW water-cooled VFD is available operating for long time, which can reinforced.

The processing abilty of the machine and can be used to. Process aluminum alloy and hard wood.

Water cooling spindle works more stable and durable. High quality accurate ball Screws drive make the engrving more precision.

Anti-blackflash, high precision, long life circle. Machine on steady desk well. Make sure that your computer has a 25pin USB port output. Place the contral box in a ventilated dry place where there is no dust, no moisture 4.

Connecting the control box with the. Machine and you computer and make sure the plug will not come off.

Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). It will damage the driver of the controller. Correctly instal the Spindle motor and the heat pump.

The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.

You can enjoy making you dream with using our. We only sell engraver machine not include the software. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.