PROXXON Micro Mill FF 230, #34108. MICRO Mill FF 230 The MICRO Mill FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic.
The headstock swivels through 360°, indicated on a scale. One revolution equals 1/32 (1mm) travel, 1 division equals. The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds.
The machine comes with three collets of 15/64", 5/16" and 25/64 (6, 8 and 10mm). The solid table has a size of 10 5/8" x 3 5/32" (270 x 80mm) and is T-slotted to 15/32" x 15/64" x 13/64 (the MICROMOT norm of 12 x 6 x 5mm). Important:For best results when milling, it is recommended to lock the headstock. This is easily done via the FF 230's lock levers. Note:Fine feed available separately as NO 24 140.
Technical data:Speeds 280 - 550 - 870 - 1,200 - 1,500 - 2,200rpm. Table Size 10 5/8" x 3 5/32" (270 x 80mm). Column Size Ø 1 3/8" x 15 3/4" long (35 x 400mm). X-Y Travel 6 11/16" x 2 9/16" (170mm x 65mm).
Volts 110 - 120V AC, 60Hz. If proper paperwork is missing, PROXXON Inc.
Will not issue a credit. California Residents Prop 65 InformationWARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. The MICRO Mill FF 230 is a small, accurate milling system uséd to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. Important: For best results when milling, it is recommended to lock the headstock.
Note: Fine feed available separately as NO 24 140. Technical data: Speeds 280 - 550 - 870 - 1,200 - 1,500 - 2,200rpm.
California Residents Prop 65 Information WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. Sorry, our items are NOT available for pick-up. No additional information at this time.
PROXXON 2-speed Scroll Saw DS 460, #37094. PROXXON 3 piece thread cutting set, #24540. PROXXON 4 piece milling cutter set, #24610.PROXXON 4 piece milling cutter set, #24620.