Pnuematic Impact Power Drawbar For J Head Bridgeport Or Import Milling Machine

  

HI YOU ARE LOOKING AT A PNUEMATIC IMPACT AIR OPERATED POWER DRAWBAR FOR A STEP PULLEY HEAD IMPORT AND BRIDGEPORT TYPE MILLING MACHINE. JET, MSC, ATRUMP, WT TOOL, CHEVLAIR, ENCO, TRAVERS, SUPERMAX, AND MANY MORE.

THE MOST SIMPLE AND ECONOMICAL POWER DRAWBAR OUT THERE. IT WORKS FROM AIR PRESSURE 90 PSI MAX. A HUGH TIME AND AGGRAVATION SAVER NO LOST TIME LOOKING FOR YOUR WRENCH OR HAMMER. MAIN BODY MADE OF 6061 ALUMINUM, MAIN FRONT SLIDE IS MADE WITH STEEL ROD AND NYLON BUSHING, FOR LONG LIFE. ONE SCREW REMOVES TOP PART TO GIVE ACCESS TO DRAW BAR.

CAN BE MOUNTED IN MANY POSITIONS AROUND THE HEAD TO FIT YOUR OWN PREFERENCE. COMES ASSEMBLED COMPLETE WITH IMPACT WRENCH READY TO MOUNT ON YOUR MILL AND USE. ALL PARTS MADE IN OUR SHOP HERE AT M&T MACHINE, TAYLORSVILLE N. 28681 USA EXCEPT THE IMPACT WRENCH AND FASTENERS.

WE DEVELOPED THIS POWER DRAWBAR IN OUR SHOP BEWARE THERE ARE INFERIOR COPIES OUT THERE BUT GET THE ORIGINAL HERE. WE HAVE USED THIS TYPE POWER DRAW BAR IN OUR SHOP FOR MORE THAN 10 YEARS WITH NO PROBLEMS. THEIR ARE COPIES OUT THERE PLEASE SUPPORT OUR TIME SPENT ON RESEARCH AND DEVELOPMENT YOU WILL NOT REGRET IT {REQUIRES YOU DRILL THREE 1/4-20 HOLES IN THE TOP OF YOUR MILLING HEAD TO MOUNT THE POWER DRAWBAR} INSTALLATION INSTRUCTIONS INCLUDED.

THANK YOU VERY MUCH FOR LOOKING.