Pm-728vt Ultra Precision Bench Top Vertical Milling Machine Free Ship! Taiwan

  

This machine uses 120V Standard Power! THIS MACHINE IS A STEP ABOVE ANYTHING CURRENTLY ON THE MARKET! Ultra High Quality Milling Machine, Made to Exacting Standards. Nothing Else Compares To The Quality Level Of This Mill. If You Want The Best, This Is It.

This machine is 100% Made in Taiwan. It Costs More, But You Get More. The Highest Level of Quality and Precision in a Bench Top Mill Available Anywhere. Super Precise Way Grinding Matched with Highly Skilled Precision Fitting and Scraping of Matching Way Surfaces and Gibs Make This Machine A Step Above Anything Else On The Market.

Larger Travels Than Comparable Models, Especially in the Y and Z Axis. 370 Pounds To Work With. Easy Enough To Move, Heavy Enough To Take Serious Cuts. Ultra Precision Ground Spindle, with Triple Bearing Support. Spindle is Supported by Angular Contact Bearings, Which Run Precise and Stay Cool at High Speeds. Quill DRO Included Standard (This is for the spindle up/down movement).

Worm Drive Gear for Easier Tramming of the Head. Enlarged Z Axis Column for Unmatched Rigidity. Special Features that set this mill apart from others (BE SURE TO COMPARE THESE DIFFERENCES).

THIS MACHINE IS A STEP ABOVE ANYTHING CURRENTLY ON THE MARKET. Ultra Precision Spindle, with Triple Bearing Support.

Deep Groove Ball, and Angular Contact Bearings Run Precise and Stay Cool at High Speeds. Features a Worm Drive Gear for Tramming Head. Main Z Axis Column is attached to the base with 4 bolts, and mounted from the top, with a wide, proper mounting surface for much more rigidity over other models in this size range. Readings with larger dials on the X and Y axis, with true 10 Thread Per Inch Leadscrews make it easier to cut accurately - One line on the dial is. , one full turn of the handwheel is.

, much easier to use than those with odd metric conversions. Highest Precision ground ways, With Mating Surfaces Hand Scraped To Fit for Much Tighter and Smoother movements - Ultimate High Precision Fit Of Ways and Gibs With This Machine. Thrust Bearings in leadscrew ends - not bushings - Much smoother movements and less backlash. Split nuts on X and Y Axis to allow for backlash adjustment. DC BRUSHLESS MOTOR, Variable Speed, POWERFUL, SMOOTH, and RELIABLE Belt Drive from Motor to Spindle runs MUCH quieter than others, and eliminates any failure prone plastic gears (And the hassle of changing them when stripped).

Variable Speed with Belt Drive and Brushless DC Motor. And This listing includes the stand/base as shown. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. 1060 Montour West Industrial Park. We are machinists here too, so we know what we sell.

This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help.

Power Requirements: 120V, 20 Amp Circuit Do Not Use Extension Cords! Recommended End Mill Capacity 1? Recommended Face Milling Capacity 3? Table Size 7 x 28? Cross Travel (Y Axis) 8.5? With Full Way Support, 10 to Travel Stop.

Longitudinal Travel (X Axis) 17-3/4" With Full Way Support, 19" to Travel Stop. Vertical Travel (Z Axis) 16? Max Distance Spindle to Table 16-1/4? Spindle to Column Distance 8-1/2. Table Leadscrew Pitch 10 TPI.

Leadscrew Pitch, X, Y, and Z Axis 10TPI. T Slot Size Actual size 12mm, our 1/2? Kit listed is sized for this machine. Taper of Spindle R-8, w/7/16-20 Drawbar Thread. Range of Spindle Speeds 75-4000 RPM, 2 Steps, Variable. Headstock Tilt Left & Right ±90°, With Worm Gear Movement For Easier Tram Adjustments. Motor 1 HP, Brushless DC Variable. Height (Without Stand) Head At Normal Working Height 36", Head at Max Travel 44-1/2".

Table Surface to Machine Bottom (Where it sits on the stand or a table) 8-1/2. Bolt Mounting Pattern of Machine (Where it bolts to the stand) 10-1/8"W x 17-1/2" D, 1/2 Holes. Bottom of machine casting 20-3/4 Deep x 12-1/2 W - 3-1/4 High at Mounting Bolt Surface. Chip Pan Dimensions 21-1/2" W x 24-3/4" D. Max Depth, Distance From Rear of machine to front Y Axis Handle Tip 30.

Max Width, Table Handle Tip to Tip 41. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered.

If you have ANY questions, feel free to message us. Check out our other auctions for more lathes and mills.