PM-727V Precision Benchtop Milling Machine with 3-Axis DRO! FREE SHIPPING

  

(No Stand is included in this listing). This machine requires a Standard 120V Power Supply! Variable Spindle Speeds, with a range from 40 to 3000 RPM, in 6 steps, allows you to perfectly match the speed for each job.

Great for those who are looking for a. Compact machine for a smaller work shop, yet need the ability to take heavier cuts. Compared with other machines in this size range.

Spindle is Supported by High Precision Tapered Roller Bearings. Mill Head May be Tilted ±90° (both left and right). Precision Manual Fine Down Feed is standard.

Adjustable Tapered Gibs for longer life. Positive Locks are standard for Table, Head, Quill, and Column. Easy Reading Dials Have Satin Chrome Finish, Graduated in. Quill DRO is Standard, Accuracy of the Display 0.0005, Selectable from. Spindle To Table Max Distance for taller work.

Y Axis Travel, More than other machines in this class. Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered. Cross Travel (Y Axis): 8-1/2?

Longitudinal Travel (X Axis): 15? Table Leadscrew Pitch 10 TPI. Per Turn Table Dial Graduations. Vertical Travel (Z Axis): 16?

Max Distance Spindle to Table: 18-1/4? Taper of Spindle: R-8, w/7/16-20 Drawbar Thread Spindle (Quill) Travel: 3? (T Slots are slightly less than 1/2?

, actual size 12mm, our 1/2? Kit is sized for this machine) Range of Spindle Speeds: 40-3000rpm, 6 Steps, variable in each range Head Tilt: Left & Right ±90° Motor: 1.5 HP Net Weight (Not Including Base): 475 LBS Net Weight (With Optional Base): 575 LBS Power Required: 110/120V, 20A Circuit. 5' cord, Includes 120V Plug with ground Dimensions (Assembled on stand): 39? D Height with head at top of Z travel: 80? (On Stand) Height with head at normal working height: 75?

(On Stand) Optional Stand Height 32? Machine Base Dimensions (Cast Iron Base of machine, where it sits on the chip pan) Approx.

13-1/2"Wx21"D Machine Base Dimension (Bolt Pattern) Approx. 11"Wx14-1/4"D Table Height, machine base (Where it sits on the chip tray) to table, approx. Footprint of stand at floor, approx.

Average time delivered is 2-7 days depending on how far from Pittsburgh you are located. If you need liftgate service, please message us one you place your order to let us know. Quality Machine Tools / Precision Matthews Machinery Co. 1060 Montour West Industrial Park.

We are machinists here too and have been in business for over 20 years. We know our machines and we know what we sell. So if there is any question, we can help.