Mill Drill Milling

Milling Machine Accessory Air Power Drawbar A&T ANT-300S, R8, Or NT 30

Milling Machine Accessory Air Power Drawbar A&T ANT-300S, R8, Or NT 30
Milling Machine Accessory Air Power Drawbar A&T ANT-300S, R8, Or NT 30
Milling Machine Accessory Air Power Drawbar A&T ANT-300S, R8, Or NT 30
Milling Machine Accessory Air Power Drawbar A&T ANT-300S, R8, Or NT 30
Milling Machine Accessory Air Power Drawbar A&T ANT-300S, R8, Or NT 30

Milling Machine Accessory Air Power Drawbar A&T ANT-300S, R8, Or NT 30   Milling Machine Accessory Air Power Drawbar A&T ANT-300S, R8, Or NT 30

A&T Universal Air Power Drawbar. Machinist changes tools manually 10-15 times per day at 3 minutes per tool change. By installing the Air Power Drawbar unit, machinists change tools within seconds and eliminate the need to climb for the drawbar and the use of ¾ wrench. With the use of A&T Air Power Drawbar unit, one can save approximately 12 hours per month.

The unit can be installed within 25 minutes without any special drawbar needed. 19 mm socket for R-8 or 30 taper and 21 mm socket for 40 taper spindles.

The unit is powered by shop air 90 P. I without electrical wiring and also no drilling or tapping is required for variable speed mill head.

A uniquely designed air motor with some parts made from nickel, chrome tungsten alloy steel. Operators can change tools with control valve pushed button to engage or disengage the tools.
Milling Machine Accessory Air Power Drawbar A&T ANT-300S, R8, Or NT 30   Milling Machine Accessory Air Power Drawbar A&T ANT-300S, R8, Or NT 30