Haas Dt-2 4-axis Cnc Drill /tap/mill Vertical Machining Center, New 2016

  
HAAS DT-2 4-AXIS CNC DRILL /TAP/MILL VERTICAL MACHINING CENTER, NEW 2016 - HAAS DT-2. X 28.0 Y 16.0 Z 15.5 Power 15.0 RPM 15000.0 # ATC 20.0 Taper BT30 Table-W 15.0 Table-L 34.0 # Axis 4.0. E METRIC X Axis 28.0 in 711 mm Y Axis 16.0 in 406 mm Z Axis 15.5 in 394 mm Spindle Nose to Table (max) 21.5 in 546 mm Spindle Nose to Table (min) 6.0 in 152 mm SPINDLE S. E METRIC Length 34.0 in 864 mm Width 15.0 in 381 mm T-Slot Width 0.626 in to 0.630 in 15.90 mm to 16.00 mm T-Slot Center Distance 4.92 in 125 mm Number of Std T-Slots 3 3 Max Weight on Table (evenly distributed) 250 lb 113 kg FEEDRATES S. E METRIC Max Cutting 1200 ipm 30.5 m/min Rapids on X 2400 ipm 61.0 m/min Rapids on Y 2400 ipm 61.0 m/min Rapids on Z 2400 ipm 61.0 m/min AXIS MOTORS S. E METRIC Max Thrust X 2550 lbf 11343 N Max Thrust Y 2550 lbf 11343 N Max Thrust Z 4200 lbf 18683 N TOOL CHANGER S. E METRIC Type SMTC SMTC Capacity 20+1 20+1 Max Tool Diameter (full) 2.0 in 51 mm Max Tool Length (from gage line) 7 in 178 mm Chip-to-Chip (avg) 1.6 s 1.6 s TAPPING S.

E METRIC Max Tapping Speed 5000 rpm 5000 rpm GENERAL S. E METRIC Coolant Capacity 55 gal 208 L AIR REQUIREMENTS S. E METRIC Domestic Pallet 100 in x 91 in x 99 in 254 cm x 231 cm x 251 cm Export Pallet 100 in x 91 in x 99 in 254 cm x 231 cm x 251 cm Weight 5350 lb 2427.0 kg ELECTRICAL SPECIFICATION S.

E METRIC Spindle Speed 10000 rpm 10000 rpm Drive System Inline Direct-Drive Inline Direct-Drive Spindle Power 15.0 hp 11.2 kW Input AC Voltage (3 Phase) - Low 220 VAC 220 VAC Full Load Amps (3 Phase) - Low 40 A 40 A Input AC Voltage (3 Phase) - High 440 VAC 440 VAC Full Load Amps (3 Phase) - High 20 A 20 A.