Findmall 4 Inch Lock Down Vise Accuracy Milling Vise 4 Inch Jaw Width Drill P

  
Findmall 4 Inch Lock Down Vise Accuracy Milling Vise 4 Inch Jaw Width Drill Press Vise Milling Drilling Machine Bench Clamp Clamping Vice(4). High accuracy clamp vise with a jaw width of 3. Jaw opening: 4.56 inch (116 mm). Lock clamp vise height: 3.54 inch (90 mm).

Jaw height: 1-1/4 inch (32 mm). This bench clamp adopts high quality ductile iron 80000 PSI to achieve minimum bending. Maximum clamping force of 19 KN. Flame hardened sliding surface of the clamping vise bed ensures ultimate durability & long service life.

The accuracy milling drilling vise is suitable for milling, drilling machine and accuracy parts finishing. Specification: Milling Vise 4 Inch Jaw width: 3.93 inch (100 mm) Jaw opening: 3.93 inch (100 mm) Bench clamp vise height: 3.86 inch (100 mm) Jaw height: 1.3 inch (32 mm) Accurate to 0.002? Per 4 on squareness and 0.006 per 4 on parallelism without base Vise Key: 11.11mm table slot width, 14.00mm base width Product features Each pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates.

It's very accurate and durable Sliding surface of the vise bed is flame hardened and ground Vise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSI With anti-jaw lifting mechanism. K type angle lock nut is made from the highest quality ductile Iron, firm and durable Acme screws and easy to read 0-360 deg scales Screws from the top through the jaw make the vise more stable and durable. Taiwan new type The installation size of Soft Jaw is the same as Kurt.

4 Aluminum Soft Jaws which are made in USA can be mounted into this vise Four setting positions of the jaw plates are available, widening the jaw plates opening. Any product you return must be in the same condition you received it and in the original packaging. We usually respond within 24 hours on weekdays. Thank you for shopping at our store.