1.5/2.2KW 3/4Axis USB CNC6090 Router Engraving 3D Carving Milling Drill Machine

  
1.5/2.2KW 3/4Axis USB CNC6090 Router Engraving 3D Carving Milling Drill Machine. Waterproof design, very durable, anti-dirt, oil spray. Dimensions: 22 x 8 x 3cm. The usb self-check light, you can type the " scroll" on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A. Feed rate control: F+, F. Spindle speed: speed up, slow down. Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point. CNC Router engraving machine parameters.

Working platform size:1045720mm(LW). The whole machine used 6061 aluminum profiles. 140mm(From base of Z axis to platform). X, Y, Z Working Area:900(Y)600(X)140mm(Z).

Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws.

X axis:ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails.

Z axis: ø12 high-strength round rail. 57 two-phase 3A (with handwheels).

Driving Power for Stepping motor. AC110, 240W, out put:DC24V10A. Working Speed :50-1500mm / min (different material with different speed settings). Spindle motor:1500W high-speed variable frequency spindle motor, ER11 chuck, with 6mm collet. 1, The spindle motor must connect with the VFD.

2, It cannot directly connect with the supply voltage (AC110V/220V). 3, Please don't change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor:0-3.5A adjustable four-axis drive. (TB6560AHQ chip, 24V power supply, 2,4,8,16 subdivision can be set, factory settings 8 subdivision). Carving command:G code / TAB file / nc file / NCC file.

VFD:AC220V, 1500W, 0-400Hz (built-in control box). Support system:Windows XP / win7 with 32bite. Sculpture, round carving, wooden handicraft processing. Advertising signs, logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products.

The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. Is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable.

3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output.

Place the control box in a ventilated dry place where there is no dust, no moisture. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller. Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now.

1X main unit (working base). 1X Sinal cable for A axis. 6X 410mm black Inner six angle screw with nut.

8X 520mm black Inner six angle screw. 4X 58mm Flat Philip's head screw with nut and gasket.

8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm).

1x Tools Setting Auto-Check Instrument for CNC. Working platform size:1045x720mm(LxW). The Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system.

Frame Material:The whole machine used 6061 aluminum profiles. X, Y, Z Working Area:600x900x150mm. Stepping motor:two-phase 3A (with hand wheels).

Driving Power for Stepping motor:AC110,240W, Output DC24V10A. Working Speed:50-1500mm/min (different material with different speed settings). High-speed variable frequency spindle motor, ER11 chuck, matching 6mm bur. Variable-frequency Drive(VFD):AC110V, 2200W, 0-400Hz(built-in Control box). Drive of Stepping motor 0-3.5A adjustable four-axis driveTB6560AHQchip, 24V power supply, 2,4,8,16Subdivision settings, Factory. Cooling method:Water cooling, Matching heat dissipation water pump.

Carving command:G code/TAB file/nc/TAB /NCC/file. Gross weight of machine :About 145kg/320lb. Update function: with limit switch. Logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. 3, High quality accurate ball Screws drive make the engraving more precision.

Drive of Stepping motor:0-3.5A adjustable three-axis drive. VFD:AC110V, 1500W, 0-400Hz (built-in control box). Communication interface:through USB PORT connect with computer.

Anti-black flash, high precision, long life circle. Assembling and locating the machine on steady desk well. Connecting the control box with the machine and you computer and make sure the plug will not come off.

Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z). Otherwise, It will damage the driver of the controller. Feedback is very important to us.

It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.

If it's non-workdays, please kindly be patient and wait till Monday. Drilling, Milling, Engraving, Cutting, Carving.